How To Start A Car After Airbags Deploy

Are you in a panic because your car’s airbags have deployed? Don’t worry, we’ve got you covered. This article will provide you with step-by-step instructions on how to start your car after the airbags have deployed.

First, you need to assess the damage and make sure there are no other major issues with your vehicle. Once you’ve determined that it’s safe to proceed, you’ll need to reset the airbag system. This is a crucial step to ensure that your car’s safety features are functioning properly.

Finally, you’ll want to check for any other potential safety concerns before hitting the road again. By following these instructions, you’ll be able to safely start your car and continue your journey. So, let’s get started and get you back on the road in no time!

Assessing the Damage

Before you can assess the damage, you’ll need to ensure the car is in a safe location. Park the vehicle away from traffic and turn on the hazard lights to alert other drivers.

Once the car is secure, evaluate the condition of the airbags. Look for any visible signs of damage, such as tears or deployment. Check the dashboard for any warning lights indicating a malfunction.

Take note of any other damages to the car’s exterior and interior, such as broken windows or deployed seat belts.

After assessing the damage, contact your insurance company to report the incident and initiate the claims process. Provide them with all the necessary information, including details about the airbag deployment and any other damages to the vehicle.

Resetting the Airbag System

To reset the airbag system, you’ll need to follow a specific procedure. First, ensure that the ignition switch is in the off position and remove the key from the ignition. Then, disconnect the negative terminal of the battery to disable the airbag system. Next, wait for at least 10 minutes to allow any residual electricity to dissipate. After that, carefully inspect the airbag modules and wiring for any signs of damage or loose connections. If everything looks intact, reconnect the negative terminal of the battery. Finally, turn the ignition switch to the on position and check if the airbag warning light illuminates and then turns off. If the light stays on or flashes, it indicates a fault in the system, and professional troubleshooting may be required. Refer to the table below for a visual representation of the steps involved in resetting the airbag system.

Steps to Reset Airbag System
1. Turn off ignition and remove key
2. Disconnect negative terminal of battery
3. Wait for 10 minutes
4. Inspect airbag modules and wiring
5. Reconnect negative terminal of battery
6. Turn ignition switch to on position
7. Check airbag warning light

Following these steps will help you effectively reset the airbag system and troubleshoot any issues with airbag deployment.

Checking for Other Safety Concerns

Make sure you take a moment to check for any other potential safety concerns that could affect your driving experience.

Start by identifying potential electrical issues. Look for any visible damage to the electrical system, such as frayed wires or loose connections. Check all the lights, indicators, and control functions to ensure they are working properly. If you notice any issues, it’s important to have them addressed by a professional before driving the car.

Next, ensure proper seatbelt functionality. Check that the seatbelts retract and latch securely. Pull on the seatbelt to make sure it locks in place when you give it a sharp tug. If there are any signs of wear, such as fraying or tearing, the seatbelt may need to be replaced.

Remember, safety should always be your top priority, especially after deploying airbags. By carefully inspecting for potential electrical issues and ensuring proper seatbelt functionality, you can help ensure a safe driving experience.

Frequently Asked Questions

Can I still drive my car after the airbags have deployed?

Yes, you can still drive your car after the airbags have deployed. However, it is important to prioritize driving safety and consider the effectiveness of the airbags.

While the airbags may have provided protection during the initial impact, they may no longer be functional after deployment. It is crucial to have the car inspected by a professional to ensure that all safety features, including the airbags, are in proper working condition before continuing to drive.

How much will it cost to replace the deployed airbags?

To replace deployed airbags, the cost estimate can range from $1,000 to $3,000, depending on the make and model of your car.

DIY alternatives are not recommended, as airbag replacement requires specialized knowledge and tools. It is crucial to have a certified mechanic handle this task to ensure proper installation and functionality.

Attempting to replace airbags yourself may lead to further damage and compromise your safety in the event of another collision.

Will my insurance cover the cost of replacing the deployed airbags?

Your insurance coverage may help with the cost of replacing deployed airbags. It is important to review your policy to determine if airbag replacement is covered.

Contact your insurance provider and provide them with the details of the deployed airbags. They will guide you through the claims process and inform you about any deductibles or limitations that may apply.

Keep in mind that documentation of the airbag deployment and any related damage will be necessary for the claim.

Are there any legal requirements or restrictions regarding driving a car after the airbags have deployed?

To address the legal ramifications and safety concerns related to driving a car after the airbags have deployed, it is important to note that there are no specific legal requirements or restrictions in place.

However, it is crucial to consider the safety implications. Deployed airbags indicate that the car has been involved in a significant impact, and it may have structural damage or other hidden issues.

It is advisable to have the vehicle thoroughly inspected by a qualified professional before resuming driving.

Can a car be considered safe to drive if the airbags have deployed but there is no visible damage?

To determine if a car is safe to drive after airbags have deployed but there is no visible damage, it is important to consider airbag safety guidelines and potential risks.

Although there may be no visible damage, the deployment of airbags indicates a significant impact, compromising the structural integrity of the vehicle.

Driving with deployed airbags increases the likelihood of further damage, malfunction, and injury in the event of another collision.

It is recommended to have the car thoroughly inspected by a professional before considering driving it.


In conclusion, starting a car after airbags deploy requires a thorough assessment of the damage. This includes checking for any other safety concerns. Resetting the airbag system is also necessary. It is important to take the necessary precautions and follow the proper procedures. This ensures the safety of both the driver and passengers. By being knowledgeable about the steps involved and taking the time to address any potential issues, you can confidently start your car and resume normal operation.